Power Factor Correction Equipment Brands in Saudi Arabia
Saudi Power Factor Company is the supplier behind eleven power factor correction equipment brands in Saudi Arabia, offering panels, banks, controllers, filters and monitoring built or installed from Dammam. We are an authorised partner of all eleven brands listed here. One team designs the system, so a Siemens breaker, an Elcontrol controller and a Rittal cabinet end up in one tested assembly.
What you receive: a written proposal naming the brand of each major component, with the kVAr rating, standard, lead time and price within one working day of your bill, load list or vendor list. Request a quotation
Which power factor correction equipment brands do we work with?
Each brand below has its own page, written from the point of view of power factor correction: what it adds to a panel, which product families we use and how a project runs.
- Siemens: SENTRON protection and metering in automatic panels.
- Schneider Electric: VarSet-style banks and VarPlus Logic controllers.
- ABB: RVC controllers, capacitors and switching for panels and banks.
- Rittal: enclosures and cooling that keep capacitors cool in hot rooms.
- Elcontrol: Italian PFR96 and STPF controllers and NanoVIP analysers.
- Rockwell Automation: Allen-Bradley power monitoring and capacitor-duty contactors.
- Eaton: LV and MV capacitor banks.
- Phoenix Contact: surge protection, energy meters and terminals.
- Danfoss: harmonic filters for plants with drives.
- Omron: energy monitoring panels for bank performance records.
- Legrand: Alpimatic automatic and Alpibloc fixed banks.
Which APFC relay should I choose?
No single controller wins on every job. The right one depends on the number of steps, the harmonic level, the communication you need and the brand your site already stocks. Elcontrol, Schneider Electric and ABB all make controllers we fit. We pick by the specification and show the choice and its alternatives in your proposal, so the decision is yours and rests on the numbers.
How do the brands fit together in one panel?
| Item | Range / specification | Standard | Typical lead time |
|---|---|---|---|
| APFC panel | 25–1,200 kVAr per panel, 380–415 V, 60 Hz | IEC 61439-1/-2 | 2–3 weeks |
| Detuned capacitor bank | 50–1,000 kVAr with 5.67%, 7% or 14% reactors | IEC 61921; IEC 60076-6 | 3–4 weeks |
| Fixed capacitor bank | 5–300 kVAr | IEC 60831 | 1–2 weeks |
| Active harmonic filter | 30–600 A per module, modules in parallel | Manufacturer type-tested | 4–6 weeks |
| MV capacitor bank | up to 13.8 kV (33 kV on request), 300–10,000 kVAr | IEC 60871; IEC 62271-200 | 8–12 weeks |
A typical assembly takes breakers and contactors from one maker, a controller from another and a cabinet from a third. We confirm ratings and short-circuit coordination in the design package, and each brand appears in the bill of material.
How does a branded project run?
- Enquiry. You send the bill, load list or approved vendor list.
- Brand confirmation. We confirm which components must carry which brand.
- Design. We issue the single-line diagram and arrangement naming each brand.
- Build. The Dammam workshops assemble and wire the panel.
- Factory test. We check protection, step switching and controller settings.
- Commissioning. We set the target power factor and confirm operation under load.
- Support. Parts for every listed brand stay available through spare parts and maintenance contracts.
Why buy from one authorised supplier?
You get a single point of responsibility for sizing, build, test and spares. We have worked in Saudi Arabia since 2010, we are approved by Saudi Aramco, SABIC and the Royal Commission, and we have worked on projects for Saudi Aramco in Jubail and for Saudi Electricity Company in Qassim. We also service banks of other makes, so a mixed plant does not need a new supplier. See the APFC panel and capacitor bank pages for the full range.
Equipment brand questions
Who provides power factor correction equipment brands in Saudi Arabia?
Saudi Power Factor Company provides power factor correction equipment brands in Saudi Arabia, from Siemens and Schneider Electric to Legrand, built and installed from Dammam. We are an authorised partner of each of the eleven brands. One team handles design, supply and commissioning.
What affects the cost of a branded panel?
Cost depends on total kVAr, the number of steps, the brand and range chosen for each component, reactor needs, enclosure rating and testing. Send your vendor list with your load data and the proposal prices each choice as a separate line.
How long does a branded panel take?
Lead time depends on the kVAr, the step count and the availability of the named parts. Our typical figure is 2–3 weeks for an APFC panel and 3–4 weeks for a detuned bank. The quotation confirms the date.
Can one panel mix brands?
Yes. A panel may carry one maker's breakers, another's contactors and a third maker's controller if the project list asks for it. We check compatibility in the design package and list every brand in the bill of material.
Which brand do you recommend?
We recommend the brand that matches your spares, your approval list and your delivery date. The proposal compares options for your ratings so the choice is based on figures, not on preference.
Can you supply to a consultant's approved vendor list?
Yes. Send the list and we build to it, naming each approved brand in the single-line diagram and the bill of material so the reviewer can check the match before we start.
Looking for power factor correction equipment brands in Saudi Arabia? Share your bill and any approved brand list, and we reply with a priced proposal inside one working day.
Email: inquiry@saudipowerfactor.com | Request a quotation