Power Factor Correction in the Eastern Province
Saudi Power Factor Company provides power factor correction in the Eastern Province from its Dammam office and workshops, serving plants and buildings from the Gulf coast to the Al Ahsa oasis. One team sizes, builds and commissions, so a site in Qatif, Ras Tanura or Hofuf gets the same panel standard as one in Dammam. Send a bill to begin; we reply within one working day.
What you receive: a written regional proposal setting out kVAr, enclosure rating for your site climate, route from Dammam and price within one working day of receiving your bill. Request a quotation
Which Eastern Province towns can we reach from Dammam?
Every town below is reached by road from our Dammam workshops. Dammam, Jubail and Al Khobar have their own pages with local detail.
| Area | Typical sites | Panel considerations |
|---|---|---|
| Ras Tanura and Qatif | Oil and gas support, marine yards, farms | Salt air; coated or stainless enclosure |
| Abqaiq | Oil-sector facilities and contractors | Vendor documentation and permits |
| Ras Al Khair | Heavy industry and utilities | Large motors, harmonic checks |
| Al Ahsa and Hofuf | Cement, food and date processing, building materials | Dust and high ambient temperature |
| Hafar Al Batin | Contractors, warehousing, agriculture | Long haul; plan commissioning dates |
| Dammam, Jubail, Al Khobar | See their pages | See their pages |
From Dammam, Al Khobar and Qatif are a short drive, Jubail takes about 1 hour, and our site response in the Eastern Province is within one working day.
What does a power factor of 80% mean?
It means that only 80% of the apparent power your supply delivers does useful work, and the rest is reactive power moving back and forth. A plant at 0.80 draws 25% more current than one at 1.00 for the same kW. That extra current heats cables and loads the transformer, which is why correction pays even where no charge applies.
Are APFC panels and capacitor banks the same?
An APFC panel is a capacitor bank with an automatic controller that switches steps in and out as load changes. A fixed bank has no controller and suits one steady load. Most Eastern Province plants have changing load, so the automatic form is common; see our APFC panels page.
Power factor correction in the Eastern Province: heat, dust and salt
Site climate matters as much as kVAr here. Capacitors have a temperature class, and inland plants in Al Ahsa run hotter than a Gulf-coast switch room. We ask for the room temperature and the dust level, then choose ventilation, derating and enclosure to suit. Panels are built with ABB, Schneider Electric and Siemens components in our Dammam workshops. Enclosures run from IP31 to IP54 indoors and IP55 for outdoor or kiosk use.
Saudi Power Factor Company has operated since 2010 and is approved by Saudi Aramco, SABIC and the Royal Commission. We are available for projects across Saudi Arabia, including the Eastern Province towns above. Our Saudi Arabia page lists every service.
Our address (Dammam)
Saudi Power Factor Company King Abdulaziz Street, Dammam, Eastern Province, Saudi Arabia Email: inquiry@saudipowerfactor.com
[Map: embed the Google Map for the King Abdulaziz Street, Dammam address]
How do we run a project away from Dammam?
- You send the bill, with the plant location and the room temperature.
- We choose the enclosure and ventilation for the climate.
- The panel is built and tested in Dammam.
- We deliver by road and agree the shutdown with your site team.
- Our engineers connect and commission, then test every step.
- You receive drawings and a test record.
Eastern Province power factor questions
Who provides power factor correction in the Eastern Province?
Saudi Power Factor Company provides power factor correction in the Eastern Province from Dammam, with panels built in our workshops and delivered to the site. Our certifications are ISO 9001, ISO 14001 and ISO 45001.
How much does a capacitor bank cost in the Eastern Province?
Price depends on kVAr, number of steps, reactors for harmonics, enclosure rating and voltage, then delivery distance. Bank cost is not set by region. We quote the equipment and the freight separately from your bill or load list.
How long does power factor correction take for a remote site?
Lead time is 2–3 weeks for an APFC panel and 3–4 weeks for a detuned bank and the road journey from Dammam is added. Approval of drawings and the date of your shutdown usually decide the schedule. We agree dates with your site team at order stage.
Do you serve plants outside Dammam, Jubail and Al Khobar?
Yes. We serve Ras Tanura, Qatif, Abqaiq, Ras Al Khair, Al Ahsa and Hafar Al Batin from the same Dammam workshops, and we plan each trip around your shutdown, so one visit covers connection and commissioning.
Is there a power factor correction company near me in the Eastern Province?
Our office is in Dammam, in the middle of the region's main road network. Send your bill and your location; we confirm the travel time to your gate, and advise remotely until the visit.
Need power factor correction in the Eastern Province? Tell us the town and send your latest bill, and a quotation follows within one working day.
Email: inquiry@saudipowerfactor.com | Request a quotation