Schneider Electric APFC Panel in Saudi Arabia
Saudi Power Factor Company provides the Schneider Electric APFC panel in Saudi Arabia, built in Dammam with Schneider Electric breakers, contactors and VarPlus Logic controllers. As an authorised Schneider Electric partner, we engineer, assemble and test each panel ourselves. The panel is sized from your bill and leaves the workshop with drawings and a test record.
What you receive: a written proposal naming every Schneider Electric component, with the kVAr rating, standard, lead time and price within one working day of your bill, load list or vendor list. Request a quotation
What does a Schneider Electric APFC panel mean from us?
It means an automatic panel whose switching, protection and control parts come from Schneider Electric, assembled to our own design. Where a specification names the VarSet range, we follow its step ratings and layout. The capacitors may be VarPlus units. The controller is normally a VarPlus Logic device, and the incomer and step breakers come from the Schneider Electric moulded-case range. The panel remains our design under our test record.
Which Schneider Electric items do we use?
| Item | Range / specification | Standard | Typical lead time |
|---|---|---|---|
| VarSet-style APFC assembly | 25–1,200 kVAr per panel, 380–415 V, 60 Hz | IEC 61439-1/-2 | 2–3 weeks |
| VarPlus capacitors | Sized per step | IEC 60831; IEC 61921 | 3–4 weeks |
| VarPlus Logic controller | Multi-step regulator, step count per project | Manufacturer type-tested | Included in build time |
| Step contactors and breakers | Capacitor-duty rated, per step | IEC 60947-4-1; IEC 60947-2 | Included in build time |
| Detuning reactors | 5.67%, 7% or 14% where harmonics require | IEC 60076-6 | 3–4 weeks |
Which Schneider power factor controller fits my panel?
A VarPlus Logic controller suits most new panels because it displays the power factor, the step status and the harmonic distortion on one screen. An EasyLogic-class regulator fits cost-sensitive jobs with fewer steps. We recommend by step count, harmonic level and your spare-parts policy. Our power factor controller page compares the options.
How much does a Schneider capacitor bank cost in Saudi Arabia?
Price depends on total kVAr, steps, detuning, enclosure rating and the test scope. We do not list a catalogue figure because an LV bank is sized from your load. Send the bill and the proposal prices the capacitors, controller and protection as separate lines. Replacing old capacitors inside a working panel is quoted under our retrofit service.
How does a Schneider-based panel project run?
- Enquiry. You send the bill, load list or vendor list.
- Brand confirmation. We confirm which components must carry the Schneider Electric name.
- Design. We issue the single-line diagram and general arrangement.
- Build. The Dammam workshops wire and assemble the panel.
- Factory test. We check wiring, protection and step switching.
- Commissioning. We set the target power factor and confirm switching under load.
- Spares. Contactors and controllers stay available from Dammam stock.
Schneider Electric partner questions
Who provides a Schneider Electric APFC panel in Saudi Arabia?
Saudi Power Factor Company provides APFC panels built with Schneider Electric components from its Dammam workshops. We are an authorised partner of Schneider Electric and have been active since 2010. The proposal lists each Schneider part against the project specification.
What affects the cost of a Schneider-based panel?
Cost depends on total kVAr, step count, the contactor and breaker ranges chosen, reactor needs, enclosure rating and testing. Send your vendor list with your load data and the proposal prices each choice, so you see what each upgrade adds before you order.
How long does a Schneider-based panel take?
Lead time depends on kVAr, step count and the availability of the named components. Our typical figure is 2–3 weeks for an APFC panel and 3–4 weeks for a detuned bank. Fast approval of drawings and brand choices keeps that schedule.
How is an APFC panel sized in kVAr?
Take the active power from your bill, the present power factor and the target, then calculate the reactive power to remove. We add margin for load growth and check harmonics before choosing plain or detuned capacitors. A logged survey gives the most reliable figure.
Can old capacitor banks be replaced with Schneider parts?
Yes. We check the existing enclosure, busbars and cooling, then fit new capacitors, contactors and a VarPlus Logic controller to the same footprint where the space allows, and test the bank before handover.
Can you build to a mixed-brand vendor list?
Yes. A panel can carry Schneider Electric contactors with ABB or Siemens breakers if the project list asks for it. We confirm ratings and short-circuit coordination in the design package and show each brand in the bill of material.
Looking for a Schneider Electric APFC panel in Saudi Arabia? Share your vendor list or bill, and our engineers will return a priced Schneider Electric quotation inside one working day.
Email: inquiry@saudipowerfactor.com | Request a quotation